---
title: "How to calculate roof square footage · AreaPal"
url: https://areapal.app/guides/how-to-measure-a-roof
updated: 2026-11-15
publisher: AreaPal (made by 8 Ventures)
---

> Roof square footage is the footprint times the pitch factor (1.118 at 6/12). Divide by 100 for squares, add 10–15% waste, buy 3 bundles a square.
# How to measure a roof and calculate its square footage

To calculate roof square footage, measure the roof's footprint with the overhangs, then multiply by the pitch factor: **1,000 sq ft of footprint at 6/12 is 1,118 sq ft of roof (103.9 m²)**. Divide by 100 to get roofing squares, add 10% waste for a gable roof or 15% for a hip roof, and buy three bundles per square.

**The AreaPal team** · Updated Nov 15, 2026 · 7 min read

## The short answer

- Roof square footage = footprint with overhangs × pitch factor. At 6/12 the factor is 1.118; at 8/12 it is 1.202.
- One roofing square is 100 sq ft of roof surface (9.29 m²).
- Add 10% waste for a simple gable roof and 15% for a hip or cut-up roof.
- Most asphalt shingles come 3 bundles to the square.

## How do you calculate roof square footage?

You calculate roof square footage by measuring the roof’s flat footprint, overhangs included, and multiplying it by the pitch factor for the roof’s slope. The footprint is what you would see from a drone straight above the house. The pitch factor stretches that flat area to the real, sloped surface the shingles cover.

Take a simple gable house whose walls measure 40 × 30 ft with 1 ft overhangs all round. The footprint is 42 × 32 = 1,344 sq ft. At a 6/12 pitch the factor is 1.118, so the roof is 1,344 × 1.118 = 1,502.6 sq ft.

You do not have to climb up to get the footprint. Plans, a tape around the house (add the overhang on each side), or an outline traced on a satellite map all give the same number. Climb only when you need the pitch and no plan shows it.

## What is the pitch factor for each roof pitch?

The pitch factor is the length of the sloped roof for every foot of flat run, and it ranges from 1.031 at 3/12 to 1.414 at 12/12. Pitch is written as rise over run: a 6/12 roof rises 6 in for every 12 in across, and its factor is 1.118.

| Pitch | Angle | Pitch factor | 1,000 sq ft footprint becomes |
| ----- | ----- | ------------ | ----------------------------- |
| 3/12  | 14.0° | 1.031        | 1,031 sq ft                   |
| 4/12  | 18.4° | 1.054        | 1,054 sq ft                   |
| 5/12  | 22.6° | 1.083        | 1,083 sq ft                   |
| 6/12  | 26.6° | 1.118        | 1,118 sq ft                   |
| 7/12  | 30.3° | 1.158        | 1,158 sq ft                   |
| 8/12  | 33.7° | 1.202        | 1,202 sq ft                   |
| 9/12  | 36.9° | 1.250        | 1,250 sq ft                   |
| 10/12 | 39.8° | 1.302        | 1,302 sq ft                   |
| 11/12 | 42.5° | 1.357        | 1,357 sq ft                   |
| 12/12 | 45.0° | 1.414        | 1,414 sq ft                   |

The factor works on hip roofs too. When every plane shares one pitch, plan area × factor gives the whole roof, hips and valleys included. When a house has a 6/12 main roof and a 4/12 porch, measure the two footprints apart and use each one’s factor.

## How do you find the pitch of a roof?

You find the pitch of a roof by measuring how many inches it rises over 12 in of level run. The plans usually note it on the roof plan or the elevations. Without plans, there are two ways that keep you off the roof:

1. **In the attic.**: Hold a level against the underside of a rafter, measure 12 in along the level, then measure straight up from that mark to the rafter. That vertical number is the rise: 6 in means a 6/12 pitch.
2. **From a ladder at the eave.**: Set a pitch gauge or a phone level app on the shingles at the edge and read the pitch or the angle.

Pitch and angle are the same thing in different units: 6/12 is 26.6°, 8/12 is 33.7°. The table above converts either one to the factor.

## How do you calculate roofing squares from square footage?

You calculate roofing squares by dividing the roof’s square footage by 100, because one roofing square is 100 sq ft of roof surface (9.29 m²). The example roof of 1,502.6 sq ft is 15.03 squares. To go from roofing squares to square feet, multiply by 100.

Shingles, underlayment and most labor quotes are priced by the square, so this is the number that drives the whole estimate. Keep two decimals while you work and round only when you order.

## How much waste should you add for shingles?

You should add about 10% waste for a simple gable roof and about 15% for a hip roof or a roof cut up by valleys, dormers and skylights. The waste covers the cut ends at rakes, hips and valleys and the starter course.

| Roof                        | Waste to add | Why                            |
| --------------------------- | ------------ | ------------------------------ |
| Simple gable                | 10%          | Straight cuts at two rakes     |
| Hip roof                    | 15%          | Angled cuts along every hip    |
| Valleys, dormers, skylights | 15% or more  | Many short courses and offcuts |

With 10% waste the example roof needs 15.03 × 1.10 = 16.53 squares.

## How many bundles of shingles are in a square?

Most asphalt shingles, both 3-tab and architectural, come three bundles to the square, so three bundles cover about 100 sq ft; a few heavy designer lines take four. The example roof at 16.53 squares needs 16.53 × 3 = 49.6, so 50 bundles. Check the wrapper: coverage is printed on every bundle.

The rest of the order comes from the same measurement:

- **Underlayment** by roll coverage: many synthetic rolls cover 10 squares, a roll of #15 felt about 4.
- **Starter strip and drip edge** by the linear feet of eaves and rakes.
- **Ridge cap** by the linear feet of ridges and hips.
- **Ice and water shield** along eaves and in valleys where your code calls for it.

The [roofing calculator](https://areapal.app/tools/roofing-calculator) turns a footprint and a pitch into squares and bundles.

## Can you measure a roof from a satellite map?

You can measure a roof’s footprint from a satellite map by tracing its outer edge, overhangs included, and then applying the pitch, because the map shows the roof flat from above. That is exactly the number the pitch factor needs.

**Trace the outline, read the area**

In AreaPal you tap the corners of the outline on the satellite map and the area updates as you go. For a roof you trace the eaves, then type the pitch on the roofing estimate.

Area live Imagery date shown

In AreaPal the roofing estimate takes that outline and the pitch you type, then works out squares, bundles and underlayment with your waste and your own prices. The demo roof in the app comes to 26.32 squares at 8/12, which is 2,632 sq ft of roof surface. From there it goes into a quote with up to three options, for example two shingle lines and a metal roof.

Check the imagery date before you trust an outline: an addition built after the photo will not be on it. Overhangs are hard to see under trees, so confirm one eave with a tape when you are on site. For what a new roof typically costs per square, see [roofing cost](https://areapal.app/contractors/roofing); for how roofers quote the job, see [roofing estimates](https://areapal.app/contractors/roofing).

## Questions

### How do you calculate roof square footage from a blueprint?

Use the roof plan, which is drawn flat from above. Add up the plan area of each section, overhangs included, and multiply each by the pitch factor for the pitch noted on the plan.

### How do you calculate the square footage of a hip roof?

Treat it like any other roof: plan area × pitch factor. When every plane of a hip roof has the same pitch, one factor covers the whole roof, so you never need to measure each triangle and trapezoid.

### Is roof square footage the same as the house's square footage?

No. Roof area is larger, because it adds the overhangs and the slope. A 2,000 sq ft footprint at 6/12 is about 2,236 sq ft of roof, or 22.4 squares before waste.

### Do you include the overhang when measuring a roof?

Yes. Shingles cover the eaves and rakes too, so measure to the outer edge of the overhang, typically 12 to 24 in past the walls.

Sources: Pitch factor: the slope length per unit of run, √(1 + (rise ÷ 12)²). Bundles per square and waste allowances: GAF and Owens Corning shingle packaging and estimating guidance. Underlayment coverage: manufacturers' roll labels. 1 sq ft = 0.0929 m²: NIST Handbook 44, Appendix C.

## Keep reading

[Photo: Martin Leitgeb / Unsplash](https://areapal.app/guides/roofing-cost)

[Roofing cost](https://areapal.app/guides/roofing-cost)

[Photo: Bernd Dittrich / Unsplash](https://areapal.app/guides/how-to-calculate-square-feet)

[How to calculate square feet](https://areapal.app/guides/how-to-calculate-square-feet)

[Photo: Kerin Gedge / Unsplash](https://areapal.app/guides/how-to-measure-land)

[How to measure land](https://areapal.app/guides/how-to-measure-land)

Photos by [Martin Leitgeb](https://unsplash.com/@martin_leitgeb_photos?utm_source=areapal\&utm_medium=referral), [Bernd Dittrich](https://unsplash.com/@hdbernd?utm_source=areapal\&utm_medium=referral), [Kerin Gedge](https://unsplash.com/@keringedge?utm_source=areapal\&utm_medium=referral) on [Unsplash](https://unsplash.com/?utm_source=areapal\&utm_medium=referral).

Measure it tonight.\
Then price it from the same app.
--------------------------------

Draw or walk the land in AreaPal, then save it, export it, or turn it into a quote.
