---
title: "Fence calculator: posts, rails, pickets and concrete"
url: https://areapal.app/tools/fence-calculator
updated: 2026-11-15
publisher: AreaPal (made by 8 Ventures)
---

> Type your fence length, type and gates to get posts, rails, pickets or panels, and bags of concrete. 212 ft of 6 ft privacy is 30 posts.
# Fence calculator

A wood privacy fence with posts every 8 ft takes **one post per 8 ft plus one per run, 3 rails per section and about 2.3 pickets per foot**. 212 ft with one 4 ft gate is 208 ft to build: 30 posts, 78 rails, 477 pickets and 62 bags of 50 lb concrete.

Updated November 15, 2026 · Same math as the AreaPal app's estimates

## How many posts, rails and pickets do I need?

Fence to build, gates taken out

**208** ft

Posts, with gate posts

**30** posts

Rails

**78** rails

Typical cost at these sizes

**$3,120–$9,360**

Wood privacy fence installed, $15–$45 per linear foot, from [Fixr, January 2025](https://www.fixr.com/costs/privacy-fence)

- Pickets, +5%

  **477** pickets

- Concrete, 50 lb bags

  **62** bags

- Gate kits

  **1** kits

Posts every 8 ft (10 ft chain link, 12 ft wire). Same math as the AreaPal app's fence estimate.

Step 2 · the real size

## Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

1. ### Draw it on the map

   Tap the corners on the satellite view, or walk the edge with GPS.

   *Satellite map or GPS walk*

2. ### Get the exact area

   Square feet, acres and every edge length, as you tap.

   *Cut-outs taken off*

3. ### Count it and quote it

   The estimate counts the materials; the quote prices them with your own costs.

   *Same math as this page*

4.

The formula

## How do you calculate fence materials?

Fence to build = length − gate widths (4 ft walk gates, 12 ft drive gates). Sections = fence to build ÷ post spacing, rounded up. Posts = sections + 1 per straight run, plus 2 per gate. Rails = sections × 3 for a 6 ft fence (2 for 4 ft). Pickets = feet × 12 ÷ picket width (5½ in, set tight), plus 5%. Concrete: two 50 lb bags per line post, three per gate post.

Rule of thumb

## How many posts for a fence?

| Length | Sections | Posts | 50 lb bags of concrete |
| ------ | -------- | ----- | ---------------------- |
| 50 ft  | 7        | 8     | 16                     |
| 100 ft | 13       | 14    | 28                     |
| 150 ft | 19       | 20    | 40                     |
| 200 ft | 25       | 26    | 52                     |
| 300 ft | 38       | 39    | 78                     |

Typical job cost

## Fence job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

| Job                                                            | Typical cost               | Source                                                                                                                                               |
| -------------------------------------------------------------- | -------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------- |
| Wood fence installedInstalled. A general wood range, any style | $15–$35 per linear foot    | [This Old House](https://www.thisoldhouse.com/lawns/fencing-options), June 2026; [Fixr](https://www.fixr.com/costs/fence-installation), January 2025 |
| Chain link fence installedInstalled                            | $13–$27 per linear foot    | [This Old House](https://www.thisoldhouse.com/lawns/fencing-options), June 2026                                                                      |
| Vinyl fence installedInstalled                                 | $15–$40 per linear foot    | [This Old House](https://www.thisoldhouse.com/lawns/fencing-options), June 2026; [Fixr](https://www.fixr.com/costs/fence-installation), January 2025 |
| Chain link fence installedInstalled                            | $12.25–$40 per linear foot | [Fixr](https://www.fixr.com/costs/fence-installation), January 2025                                                                                  |
| Wood privacy fence installedInstalled, materials and labor     | $15–$45 per linear foot    | [Fixr](https://www.fixr.com/costs/privacy-fence), January 2025                                                                                       |
| Vinyl privacy fence installedInstalled, privacy height         | $35–$60 per linear foot    | [Fixr](https://www.fixr.com/costs/privacy-fence), January 2025                                                                                       |

Picket fence

## How many pickets do I need?

3½ in pickets with 2½ in gaps take **2 pickets per foot** of fence, plus 5%. A 4 ft picket fence has 2 rails per 8 ft section. A 100 ft picket fence with one gate takes 202 pickets, 15 posts and 24 rails.

You need

**202** pickets

Pickets, 3½ in, 2½ in gaps, +5%

- Posts, with gate posts

  **15** posts

- Rails, 2 per section

  **24** rails

- Concrete, 50 lb bags

  **32** bags

- Fence to build

  **96** ft

Posts every 8 ft. Same math as the AreaPal app's picket fence estimate.

Pickets = fence to build (ft) × 12 ÷ (picket width + gap) × 1.05. For 3½ in pickets and a 2½ in gap that's 6 in per picket, 2 per foot. Posts every 8 ft plus one per run and two per gate; 2 rails per section.

| Picket | Gap    | Pickets per foot | Per 100 ft |
| ------ | ------ | ---------------- | ---------- |
| 3.5 in | 0 in   | 3.43             | 343        |
| 3.5 in | 1.5 in | 2.4              | 240        |
| 3.5 in | 2.5 in | 2                | 200        |
| 3.5 in | 3.5 in | 1.71             | 171        |
| 5.5 in | 0 in   | 2.18             | 218        |
| 5.5 in | 2 in   | 1.6              | 160        |

Chain link fence

## What do I need for a chain link fence?

Chain link has **line posts every 10 ft**, terminal posts at the ends and gates, and corner posts. Fabric comes in 50 ft rolls and top rail in 21 ft sticks. 200 ft with one walk gate takes 19 line posts, 4 terminal posts, 4 rolls of fabric and 10 sticks of top rail.

You need

**196** ft

Fence to build

- Line posts, 1⅝ in

  **19** posts

- Terminal and gate posts, 2⅜ in

  **4** posts

- Fabric, 50 ft rolls

  **4** rolls

- Top rail, 21 ft sticks

  **10** sticks

- Tension wire, 500 ft coils

  **1** coils

- Concrete, 50 lb bags

  **50** bags

Posts every 10 ft. Same math as the AreaPal app's chain-link estimate.

Fence to build = length − gates. Sections = ÷ 10 ft, rounded up. Line posts = sections + 1 − ends − corners. Terminals = 2 ends + 2 per gate. Fabric rolls = length ÷ 50. Top rail = length ÷ 21. Tension wire: one 500 ft coil per 500 ft.

| Length | Line posts | Fabric rolls | Top rail sticks |
| ------ | ---------- | ------------ | --------------- |
| 50 ft  | 4          | 1            | 3               |
| 100 ft | 9          | 2            | 5               |
| 200 ft | 19         | 4            | 10              |
| 300 ft | 29         | 6            | 15              |
| 500 ft | 49         | 10           | 24              |

Vinyl fence

## How many vinyl fence panels do I need?

Vinyl fence comes in **8 ft panels: one panel per 8 ft of fence and one more post than panels** on each straight run, plus two posts per gate. 150 ft with one walk gate is 19 panels and 22 posts.

You need

**19** panels

Panels, 8 ft

- Posts, with gate posts

  **22** posts

- Post caps

  **22** caps

- Concrete, 50 lb bags

  **46** bags

- Fence to build

  **146** ft

8 ft panels. Same math as the AreaPal app's vinyl estimate.

Panels = (length − gates) ÷ 8, rounded up (cut the last one to fit). Posts = panels + 1 per run, + 2 per gate. Concrete: two 50 lb bags per line post, three per gate post.

| Length | Panels | Posts |
| ------ | ------ | ----- |
| 40 ft  | 5      | 6     |
| 80 ft  | 10     | 11    |
| 100 ft | 13     | 14    |
| 150 ft | 19     | 20    |
| 200 ft | 25     | 26    |

Barbed wire fence

## What do I need for a barbed wire fence?

A 4-strand barbed wire fence uses **T-posts every 12 ft, wood H-braces at ends and corners, and one 1,320 ft roll per 330 ft of fence** (4 strands), plus 5%. A quarter mile (1,320 ft) takes 109 T-posts, 4 wood posts and 5 rolls.

You need

**108** posts

T-posts, 6½ ft

- Wood corner, end and gate posts

  **6** posts

- H-brace rails

  **2** rails

- Barbed wire, 1,320 ft rolls (4 strands)

  **5** rolls

- Fence to build

  **1,308** ft

4 strands, T-posts every 12 ft, 5% wire waste. Same math as the AreaPal app's barbed wire estimate.

T-posts = (length ÷ 12, rounded up) + 1 − ends − corners. Wood posts: 3 per corner (an H-brace each way), 2 per end, 2 per gate. Wire rolls = length × strands × 1.05 ÷ 1,320.

| Fence    | T-posts | Rolls |
| -------- | ------- | ----- |
| 330 ft   | 27      | 2     |
| 660 ft   | 54      | 3     |
| 1,320 ft | 109     | 5     |
| 2,640 ft | 219     | 9     |
| 5,280 ft | 439     | 17    |

Fence stain

## How much stain do I need?

A gallon of fence stain covers about **175 square feet** of rough-sawn wood per coat. Multiply length × height × sides stained × coats and divide by 175. A 6 ft fence 150 ft long, both sides, one coat, takes 11 gallons.

You need

**11** gal

Stain

- 5 gallon pails

  **3** pails

- Surface to stain

  **1,800** sq ft

175 sq ft per gallon per coat. Same math as the AreaPal app's fence estimate.

Gallons = length × height × sides × coats ÷ coverage (175 sq ft per gallon for rough wood, more on smooth). Spraying uses more than brushing. Check the can: coverage varies by product and wood.

| Length | Surface     | Gallons |
| ------ | ----------- | ------- |
| 50 ft  | 600 sq ft   | 4       |
| 100 ft | 1,200 sq ft | 7       |
| 150 ft | 1,800 sq ft | 11      |
| 200 ft | 2,400 sq ft | 14      |
| 300 ft | 3,600 sq ft | 21      |

Related calculators

## Work out the rest of the job

- [Fence post calculator: depth, spacing and concrete](https://areapal.app/tools/fence-post-calculator)

Questions

## Fence materials, answered

### How many fence posts do I need?

One every 8 ft plus one at the end of each straight run, and two more for every gate. A straight 100 ft fence needs 14 posts.

### How many pickets per foot of fence?

About 2.2 pickets per foot for 5½ in boards set tight, before waste. Spaced pickets need fewer: 3½ in pickets with 2½ in gaps are 2 per foot.

### How much concrete per fence post?

About two 50 lb bags for a 4×4 line post in a 10 in hole, and three for a heavier gate post, as the AreaPal app estimates it.

### How do I measure a fence line?

Walk it with a wheel, or draw the line on the satellite map in the AreaPal app: it measures each run and places the gates for you.

### How far apart should pickets be?

A gap equal to about 2/3 to 1 picket width is common: 2½ in for 3½ in pickets. Pool and pet codes may cap the gap at 4 in or less.

### How far apart are chain link posts?

No more than 10 ft for line posts; many installers use 8 to 10 ft.

### How wide is a vinyl fence panel?

Most are 8 ft wide (about 92 to 94 in between posts); some lines use 6 ft panels.

### How far apart are T-posts on a barbed wire fence?

10 to 12 ft is common for cattle; 12 ft is what the AreaPal app uses.

### How much does a gallon of fence stain cover?

About 150 to 200 sq ft per coat on rough wood; 175 is a good middle figure.

Sources: Post spacing (8 ft wood and vinyl, 10 ft chain link, 12 ft wire), rails per section, board widths (a 1×6 is 5½ in actual), 5% picket waste and 100 lb of mix per line post, 150 lb per gate post: AreaPal app rules. Post-hole mix by hole volume at 0.0075 cu ft per lb.

Measure the real area first.\
Then count the materials.
-------------------------

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.
