---
title: "Roofing calculator: squares and shingle bundles · AreaPal"
url: https://areapal.app/tools/roofing-calculator
updated: 2026-11-15
publisher: AreaPal (made by 8 Ventures)
---

> How many roofing squares and shingle bundles? Type the house footprint and roof pitch for squares, bundles, underlayment, drip edge and nails.
# Roofing calculator

A roof's area is the house footprint × the pitch factor: **1.118 for a 6/12 roof**. One roofing square is 100 sq ft and takes 3 bundles of architectural shingles; add 10% for waste. A 40 × 30 ft house at 6/12 has 1,342 sq ft of roof, 13.4 squares, and needs 45 bundles.

Updated November 15, 2026 · Same math as the AreaPal app's estimates

## How many squares and bundles do I need?

Shingle bundles, 3 per square, +10%

**45** bundles

Roof squares (100 sq ft)

**13.4** sq

Roof area

**1,342** sq ft

Typical cost at these sizes

**$4,615–$16,100**

Asphalt shingle roof installed, $3.44–$12 per sq ft, from [This Old House, March 2026](https://www.thisoldhouse.com/roofing/shingle-roof-cost)

- Underlayment rolls (10 sq)

  **2** rolls

- Drip edge, 10 ft pieces

  **14** pieces

- Starter strip bundles

  **2** bundles

- Ice and water shield, 66 ft rolls

  **3** rolls

- Coil nails, boxes

  **2** boxes

Footprint × pitch factor, 10% waste, a gable roof with eaves on the long sides. Same math as the AreaPal app's roofing estimate.

Step 2 · the real size

## Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

1. ### Draw it on the map

   Tap the corners on the satellite view, or walk the edge with GPS.

   *Satellite map or GPS walk*

2. ### Get the exact area

   Square feet, acres and every edge length, as you tap.

   *Cut-outs taken off*

3. ### Count it and quote it

   The estimate counts the materials; the quote prices them with your own costs.

   *Same math as this page*

4.

The formula

## How do you calculate roofing squares?

Roof area = footprint (sq ft) × √(1 + (pitch ÷ 12)²). Squares = roof area ÷ 100. Bundles = squares × 1.10 × 3. Underlayment: one roll per 10 squares. Drip edge: eaves and rakes ÷ 10 ft pieces. Starter: eaves ÷ 105 ft per bundle. Overhangs add area, so measure the footprint at the drip line.

Rule of thumb

## What is the pitch factor for each roof pitch?

| Pitch | Factor | Angle | Squares per 1,000 sq ft of footprint |
| ----- | ------ | ----- | ------------------------------------ |
| 2/12  | 1.014  | 9.5°  | 10.1                                 |
| 3/12  | 1.031  | 14°   | 10.3                                 |
| 4/12  | 1.054  | 18.4° | 10.5                                 |
| 5/12  | 1.083  | 22.6° | 10.8                                 |
| 6/12  | 1.118  | 26.6° | 11.2                                 |
| 7/12  | 1.158  | 30.3° | 11.6                                 |
| 8/12  | 1.202  | 33.7° | 12                                   |
| 9/12  | 1.25   | 36.9° | 12.5                                 |
| 10/12 | 1.302  | 39.8° | 13                                   |
| 12/12 | 1.414  | 45°   | 14.1                                 |

Typical job cost

## Roofing job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

| Job                                                                                                                               | Typical cost                       | Source                                                                               |
| --------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------- | ------------------------------------------------------------------------------------ |
| Asphalt shingle roof installedInstalled; labor is about 60% of the cost                                                           | $3.44–$12 per sq ft                | [This Old House](https://www.thisoldhouse.com/roofing/shingle-roof-cost), March 2026 |
| Asphalt shingle roof installedInstalled; 3-tab $3–$5, architectural $4–$8 per sq ft; tear-off may be extra at $50–$150 per square | $3–$8 per sq ft                    | [Fixr](https://www.fixr.com/costs/asphalt-roof-shingles-installation), January 2026  |
| Shingle roof installed (all shingle types)Installed, all shingle types                                                            | $400–$1,800 per square (100 sq ft) | [Fixr](https://www.fixr.com/costs/install-roof-shingles), January 2026               |

Metal roofing

## How many metal roofing panels do I need?

Exposed-fastener metal panels cover **about 36 in of width each** and run from eave to ridge. For a gable roof, panels per side = roof length × 12 ÷ 36, rounded up; each panel is the rafter length. A 40 ft roof takes 14 panels per side, 28 in all.

You need

**28** panels

Panels, both sides

- Per side

  **14** panels

- Panel length

  **16** ft

- Metal, +5%

  **1,344** sq ft

Gable roof, two equal sides.

Panels per side = roof length (ft) × 12 ÷ coverage width (in), rounded up. Panels = per side × 2 for a gable. Panel length = rafter length, eave to ridge, plus overhang. Order trim, closures and screws to match.

| Roof length | 36 in panels | 24 in panels | 16 in panels |
| ----------- | ------------ | ------------ | ------------ |
| 20 ft       | 7            | 10           | 15           |
| 30 ft       | 10           | 15           | 23           |
| 40 ft       | 14           | 20           | 30           |
| 60 ft       | 20           | 30           | 45           |

Related calculators

## Work out the rest of the job

- [Roof square footage calculator](https://areapal.app/tools/roof-square-footage-calculator)

Questions

## Roofing, answered

### How many bundles of shingles are in a square?

Three bundles of architectural or three-tab shingles cover one square, 100 sq ft. Some heavy designer shingles take four or five.

### How do I calculate roof square footage?

Multiply the footprint (including overhangs) by the pitch factor: 1.054 for 4/12, 1.118 for 6/12, 1.202 for 8/12, 1.414 for 12/12.

### How much waste should I add for shingles?

10% for a simple gable roof, 15% or more for hips, valleys and dormers, because of the cut pieces.

### How do I measure a roof without climbing it?

Measure the footprint from the ground or on the satellite map, then apply the pitch factor. The AreaPal app measures the outline from above and keeps the area for the estimate.

### How wide is a metal roofing panel?

Exposed-fastener panels are commonly 36 in of coverage; standing seam panels are often 12 to 18 in.

Sources: Pitch factor √(1 + (rise ÷ 12)²) by geometry. 3 bundles per square is standard shingle packaging (check your wrapper). 10% waste, 10 squares per underlayment roll, 105 ft per starter bundle and 33 ft per ridge cap bundle: AreaPal app rules.

Measure the real area first.\
Then count the materials.
-------------------------

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.
