Gravel calculator
Gravel at 4 in deep takes about 1.42 cubic yards or 1.92 tons per 100 square feet, including 15% for compaction. Multiply length × width × depth, divide by 27 for cubic yards, add 15%, then multiply by 1.35 tons per yard for crushed stone (1.40 for road base). A 1,500 sq ft pad at 4 in needs 29 tons.
Updated · Same math as the AreaPal app's estimates
How much gravel do I need?
29tons
21.5yd³
3loads
$870–$2,900
Gravel (average), $30–$100 per ton, from LawnStarter, October 2026- Landscape fabric, 12.5 × 300 ft
- 1 rolls
- Area
- 1,500 sq ft
Includes 15% for compaction. Crushed stone 1.35 t per yd³, road base 1.40. Same math as the AreaPal app's gravel estimate.
Step 2 · the real size
Measure the real job in AreaPal
A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.
Draw it on the map
Tap the corners on the satellite view, or walk the edge with GPS.
Satellite map or GPS walkGet the exact area
Square feet, acres and every edge length, as you tap.
Cut-outs taken offCount it and quote it
The estimate counts the materials; the quote prices them with your own costs.
Same math as this page
How do you figure gravel?
Cubic yards = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27. Add 15% because gravel compacts when it's spread and rolled. Tons = cubic yards × density: 1.35 t per yd³ for crushed stone and river rock, 1.40 for road base and drain stone. Yards sell gravel in half tons, and a tandem truck carries about 14 tons.
How many tons of gravel per 100 square feet?
| Depth | Cubic yards | Tons |
|---|---|---|
| 2 in | 0.71 | 0.96 |
| 3 in | 1.06 | 1.44 |
| 4 in | 1.42 | 1.92 |
| 6 in | 2.13 | 2.87 |
| 8 in | 2.84 | 3.83 |
| 12 in | 4.26 | 5.75 |
Gravel job cost: what contractors charge
Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.
| Job | Typical cost | Source |
|---|---|---|
| Gravel (average)Material; delivery not stated | $30–$100 per ton | LawnStarter, October 2026 |
| Gravel driveway installedInstalled, materials and labor | $1–$3 per sq ft | LawnStarter, October 2026 |
| Gravel driveway, labor-inclusivePaving a gravel driveway, labor included | $6–$18 per sq ft | Fixr, August 2025 |
How much landscape rock do I need?
River rock and decorative landscape rock run about 1.35 tons per cubic yard. At 2 in deep, 100 sq ft takes 0.62 yd³ or 0.83 tons. Larger rock (2 to 4 in) is laid at least twice its size deep, so a bed of 3 in rock wants about 4 to 6 in.
- Or cubic yards
- 1.5 yd³
- Or 0.5 cu ft bags
- 60 bags
- Area
- 180 sq ft
1.35 t per yd³ (river rock). Same math as the AreaPal app's bed estimate.
Cubic yards = area × depth (in) ÷ 12 ÷ 27; tons = cubic yards × 1.35. Lay landscape fabric first. For big decorative stones, depth should cover the stone about twice so no fabric shows.
| Depth | Cubic yards | Tons |
|---|---|---|
| 2 in | 0.62 | 0.83 |
| 3 in | 0.93 | 1.25 |
| 4 in | 1.23 | 1.67 |
| 6 in | 1.85 | 2.5 |
How much gravel for my driveway?
A gravel driveway usually takes 6 in of compacted road base, about 2.98 tons per 100 sq ft at 1.40 tons per yard with 15% for compaction. A 12 × 50 ft drive needs 18 tons, 2 truckloads.
- 14 ton truckloads
- 2 loads
- Same in cubic yards
- 13 yd³
- Fabric, 12.5 × 300 ft rolls
- 1 rolls
- Area
- 600 sq ft
Road base 1.40 t per yd³, 15% compaction. Same math as the AreaPal app's gravel estimate.
Cubic yards = length × width × depth (in) ÷ 12 ÷ 27 × 1.15 for compaction. Tons = yards × 1.40 for road base. Lay fabric on the subgrade and build in two or three lifts, compacting each.
| Depth | Tons |
|---|---|
| 4 in | 2.39 |
| 6 in | 3.58 |
| 8 in | 4.77 |
| 12 in | 7.16 |
Work out the rest of the job
Gravel, answered
How many tons of gravel do I need?
Work out cubic yards (length × width × depth in feet ÷ 27), add 15% for compaction, and multiply by 1.35 for crushed stone or 1.40 for road base. The calculator above does it for any size.
How much does a yard of gravel weigh?
About 1.35 short tons (2,700 lb) for crushed stone and river rock, and 1.40 tons (2,800 lb) for road base, as the AreaPal app figures it. Wet or very fine gravel weighs more.
How deep should gravel be?
2 to 3 in for paths and decorative beds, 4 in for a patio or shed base, and 6 to 8 in in two layers for a driveway that carries cars.
How much area does a ton of gravel cover?
At 2 in deep about 104 square feet, at 4 in about 52 square feet, with compaction.
How deep should landscape rock be?
2 in for small rock (under 1 in), 3 to 4 in for 1 to 2 in rock, and twice the stone size for larger river rock.
How thick should a gravel driveway be?
4 to 6 in over firm ground, and 8 to 12 in in layers over soft soil or for heavy trucks.
Sources: Crushed stone and river rock 1.35, road base and drain stone 1.40 short tons per cu yd, and 15% for compaction: AreaPal app rules, from typical aggregate supplier figures. Your yard's weight for its stone governs.
Imagery USDA NAIP 2023