The short answer
- Measure the line, subtract the gates, and count posts, rails, pickets and concrete from the feet to build.
- Cost = materials + labor + overhead; price = cost × (1 + markup), then sales tax on top.
- Quote 1042: $3,375.20 + $2,120.00 = $5,495.20, × 1.25 = $6,869.00, + 7.25% tax ($498.00) = $7,367.00.
- Offer good, better and best: chain link $4,984.62, wood privacy $7,367.00, white vinyl $11,940.00.
How do you price a fence job per linear foot?
You price a fence job per linear foot by adding materials, labor and overhead for the job, multiplying by 1 plus your markup, and dividing by the feet of fence. Sales tax goes on top where your state charges it. Work from the whole job first, then divide: gates, corners and the slope change the cost of a fence in ways a flat rate per foot misses.
Quote 1042 is Lisa Moreno’s 212 ft, 6 ft wood privacy fence with one 4 ft gate, built by Greenline Fence & Yard. Here it is line by line:
| Line | Working | Total | Per foot |
|---|---|---|---|
| Materials | From the count, at cost | $3,375.20 | $15.92 |
| Labor | Crew time for the job | $2,120.00 | $10.00 |
| Cost | $3,375.20 + $2,120.00 | $5,495.20 | $25.92 |
| Markup, 25% | $5,495.20 × 0.25 | $1,373.80 | $6.48 |
| Price before tax | $5,495.20 × 1.25 | $6,869.00 | $32.40 |
| Sales tax, 7.25% | $6,869.00 × 0.0725 | $498.00 | $2.35 |
| Quote total | $6,869.00 + $498.00 | $7,367.00 | $34.75 |
Per foot is over the 212 ft line. Quote 1042 has no separate overhead line: the 25% markup carries overhead and profit together. If you prefer, put overhead in as its own per-foot amount and use a smaller markup for profit; the formula is the same.
How do you work out the materials from the count?
You work out the materials by counting every part from the feet to build, then multiplying each count by your cost for it. The count comes first, and it comes from the measurement: the feet of fence, the post spacing and the gates.
Lisa’s line is 113 ft plus 99 ft, 212 ft, less the 4 ft gate, so 208 ft to build. At 8 ft spacing that is 26 sections. How to build a fence shows how to measure the line and count each part; the result is this list:
| Item | How it is counted | Count |
|---|---|---|
| Line posts, 4×4 | 26 sections + 2 straight stretches | 28 |
| Gate posts, 6×6 | 2 per gate | 2 |
| Rails | 3 per section at 6 ft high | 78 |
| Pickets, 1×6 | 208 × 12 ÷ 5.5 in, + 5% | 477 |
| Concrete, 50 lb bags | 2 per line post, 3 per gate post | 62 |
| Gate kit | 1 per gate | 1 |
Price each line from your own price book or your supplier’s current prices, not from a national average, since lumber and vinyl change by region and by month. On quote 1042 the materials come to $3,375.20 at cost, $15.92 a foot. Add waste where the count doesn’t already include it, and a line for fasteners and hardware.

Every material line, labor, markup and tax, from the line drawn on the map and the contractor’s own price book.
How do you price labor and overhead on a fence job?
You price labor as the crew hours the job takes times your hourly rate, or as a rate per linear foot from your past jobs, and you cover overhead either as its own line or inside the markup. On quote 1042 labor is $2,120.00, exactly $10.00 per foot of the 212 ft line.
Labor is where fence jobs differ most. Raise it for:
- Gates. Heavier posts, a brace and the time to hang and latch each one.
- Ground. Rock, roots and clay slow every hole; a slope means racking or stepping each panel.
- Access. A tight side yard where every post and bag is carried in.
- Removal. Tearing out and hauling an old fence.
Overhead is what the business costs to run whatever the job: the truck and fuel, insurance, tools, the phone, the office. Spread it over your jobs, by the foot or as part of the markup, and add travel for jobs far from your base. Set a minimum charge too, so a 20 ft repair still pays for the trip.
How much markup should you put on a fence job?
You should put on a markup that covers your overhead, if it isn’t already on its own line, and leaves the profit you aim for. Quote 1042 uses 25%: $5,495.20 of cost becomes $6,869.00 before tax.
Markup and margin are not the same number. Markup is added to cost; margin is profit as a share of the price. A 25% markup gives a 20% margin, because $1,373.80 is 20% of $6,869.00. If you think in margin, the markup is margin ÷ (1 − margin).
| Markup on cost | Margin on price | Quote 1042 before tax |
|---|---|---|
| 20% | 16.7% | $6,594.24 |
| 25% | 20% | $6,869.00 |
| 33.3% | 25% | $7,326.93 |
| 50% | 33.3% | $8,242.80 |
How do you price vinyl, chain link and wood privacy fence?
You price vinyl, chain link and wood privacy fence the same way, from your own count and costs, then check the result against what customers typically pay per linear foot. A wood privacy fence typically costs the customer $15 to $45 per linear foot installed, vinyl privacy $35 to $60 and chain link $12.25 to $40 (Fixr, 2025); This Old House gives $13 to $27 for chain link (2026).
| Job | Typical cost | Source |
|---|---|---|
| wood fence installedInstalled. A general wood range, any style | $15–$35 per linear foot | This Old House, June 2026; Fixr, January 2025 |
| chain link fence installedInstalled | $13–$27 per linear foot | This Old House, June 2026 |
| vinyl fence installedInstalled | $15–$40 per linear foot | This Old House, June 2026; Fixr, January 2025 |
| chain link fence installedInstalled | $12.25–$40 per linear foot | Fixr, January 2025 |
| wood privacy fence installedInstalled, materials and labor | $15–$45 per linear foot | Fixr, January 2025 |
| vinyl privacy fence installedInstalled, privacy height | $35–$60 per linear foot | Fixr, January 2025 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
These are market ranges, not AreaPal’s price and not a price to copy. Use them as a check: if your per-foot price lands far outside them, look again at the count, the labor or the markup. All three options on quote 1042 land inside Fixr’s 2025 ranges: chain link at $23.51 a foot, wood privacy at $34.75 and white vinyl at $56.32.
How do you offer good, better and best fence options?
You offer good, better and best options by pricing the same measured line in two or three materials and sending them on one quote, so the customer chooses between options instead of between contractors. The line, the gates and the labor stay the same; the materials and the price change.
| Option | Quote total | Per foot of fence |
|---|---|---|
| Good: chain link | $4,984.62 | $23.51 |
| Better: wood privacy, 6 ft | $7,367.00 | $34.75 |
| Best: white vinyl | $11,940.00 | $56.32 |
Lisa approved the wood privacy option. Put the cheapest option first and the one you recommend in the middle, and say in a line what each one gets the customer: chain link is the lowest price, wood gives privacy, vinyl needs no staining or sealing.

The same 212 ft line in chain link, wood privacy and white vinyl. The customer opens the link, picks an option and signs in the browser.
Is there a fence pricing calculator for vinyl, chain link and wood?
A fence pricing calculator counts the parts for your line, and the price then comes from your own costs, labor and markup. The fence calculator gives the posts, rails, pickets and concrete for any length, gate and spacing. For other materials, the vinyl fence calculator counts panels and posts, and the chain link fence calculator counts posts, fabric rolls and top rail. Multiply each count by your cost, then add labor, overhead and markup as above.
For what customers pay by material, see how much a fence costs per foot. Fence estimates in AreaPal shows the whole job, from the line on the map to the signed quote.
Draw the line, price the fenceAreaPal counts the materials, prices them from your price book and sends a quote with up to three options.Questions
What is the difference between markup and margin?
Markup is added on top of cost; margin is the profit as a share of the price. Quote 1042's 25% markup turns $5,495.20 of cost into $6,869.00, a margin of 20%.
Should you charge a minimum for small fence jobs?
Yes. A short repair or a single gate takes a trip, setup and loading whatever its length, so set a minimum charge that covers them and quote the larger of the minimum and the per-foot price.
How do you price gates and fence removal?
As their own lines. Each gate carries its gate posts, hardware and the time to hang it, and tearing out an old fence is priced per foot or for the job, with haul-away.
How do you price a fence on a slope or rocky ground?
Keep the materials the same and raise the labor: racking or stepping panels and digging in rock take longer. Note it on the quote so the customer sees why.
Should the quote show the price per foot?
Show the total for each option, and the price per foot if it helps the customer compare materials. The measured line on the quote shows what the feet are.
Sources: Typical installed fence costs, what a contractor charges the customer (US): Fixr, Fence Installation Cost and Privacy Fence Cost (updated January 31, 2025); This Old House, fencing options cost guide (updated June 8, 2026). Read November 2026. Quote 1042 and Lisa Moreno's fence are AreaPal's example job, not market prices.






Imagery USDA NAIP 2023