Asphalt calculator

Asphalt 3 in thick takes about 1.81 tons per 100 square feet of hot mix, plus 5% waste. Multiply area by thickness in inches, divide by 324 for cubic yards, and multiply by 1.96 tons per yard (145 lb per cubic foot). A 1,500 sq ft driveway at 3 in needs 29 tons.

Updated · Same math as the AreaPal app's estimates

How many tons of asphalt do I need?

Redraws as you type
60 ft25 ft3 in thick29 t
Hot mix, in ½ ton steps

29tons

14 ton truckloads

3loads

Tack coat

9gal

Typical cost at these sizes

$5,880–$9,375

Asphalt driveway installed, $3.92–$6.25 per sq ft, from LawnStarter, October 2026
Area
1,500 sq ft

1.96 t per yd³ plus 5% waste. Same math as the AreaPal app's asphalt estimate.

Step 2 · the real size

Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

  1. Draw it on the map

    Tap the corners on the satellite view, or walk the edge with GPS.

    Satellite map or GPS walk
  2. Get the exact area

    Square feet, acres and every edge length, as you tap.

    Cut-outs taken off
  3. Count it and quote it

    The estimate counts the materials; the quote prices them with your own costs.

    Same math as this page
  4. AreaPal on iPhone with a field outlined on the satellite mapDownload on the App Store
The formula

How do you figure asphalt tonnage?

Tons = area (sq ft) × thickness (in) ÷ 12 ÷ 27 × 1.96, plus 5% waste. 1.96 short tons per cubic yard is compacted hot mix at about 145 lb per cubic foot. Plants sell in half tons; a tandem truck carries about 14 tons. Tack coat goes down at about 0.05 gallons per square yard.

Rule of thumb

How many tons of asphalt per 100 square feet?

Tons of hot mix asphalt per 100 sq ft, before waste
ThicknessTonsSquare feet per ton
1.5 in0.91110
2 in1.2183
2.5 in1.5166
3 in1.8155
4 in2.4241
Typical job cost

Asphalt job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

Asphalt job cost, US, from cost guides read November 2026
JobTypical costSource
Asphalt driveway installedInstalled; average $5.09 per sq ft$3.92–$6.25 per sq ftLawnStarter, October 2026
Professional driveway sealcoatingProfessional sealcoating$0.17–$0.24 per sq ftLawnStarter, October 2026
Asphalt driveway sealcoatingProfessional sealcoating$0.88–$2.10 per sq ftFixr, January 2025
Sealcoating

How much driveway sealer do I need?

Asphalt sealer covers about 90 square feet per gallon per coat, and two coats is the usual job. Gallons = area × coats ÷ 90. A 1,200 sq ft driveway with two coats takes 27 gallons, 6 pails of 5.

Coats
You need
27 gal
Sealer
5 gallon pails
6 pails
Or 55 gallon drums
1 drums
Area
1,200 sq ft

90 sq ft per gallon per coat. Same math as the AreaPal app's sealcoat estimate.

Gallons = area (sq ft) × coats ÷ coverage (sq ft per gallon). Coverage depends on the product and the surface: older, porous asphalt drinks more. Fill cracks first.

Gallons of sealer, two coats at 90 sq ft per gallon
AreaGallons5 gal pails
500 sq ft123
1,000 sq ft235
1,500 sq ft347
2,500 sq ft5612
5,000 sq ft11223
Related calculators

Work out the rest of the job

Questions

Asphalt, answered

How much does a ton of asphalt cover?

About 83 sq ft at 2 in thick, or 55 sq ft at 3 in.

How thick should an asphalt driveway be?

Usually 2 to 3 in of compacted hot mix over 6 to 8 in of compacted gravel base. Heavier traffic needs more.

How much does a cubic yard of asphalt weigh?

About 1.96 short tons, roughly 3,900 lb, for compacted hot mix at 145 lb per cubic foot.

How do I measure a driveway for asphalt?

Multiply length by width for each straight section and add them. For curves and flares, the AreaPal app measures the real shape on the satellite map.

How much does a 5 gallon pail of sealer cover?

About 450 sq ft per coat at 90 sq ft per gallon, so about 225 sq ft for a two-coat job.

Sources: Compacted hot mix at about 145 lb per cu ft (1.96 short tons per cu yd), 5% waste and 0.05 gal of tack coat per sq yd; sealer at 90 sq ft per gallon per coat: AreaPal app rules. The plant's mix design and the sealer's label govern.

Measure the real area first.
Then count the materials.

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.

Download on the App Store
Measure the real areaAreaPal on the App StoreGet