Asphalt estimating software.
Paving and sealcoat, quoted from the truck.

Asphalt estimating software starts with the area. For sealcoat, two coats at about 80 sq ft per gallon take 25 gallons per 1,000 sq ft (94.6 L per 92.9 m²). New asphalt laid 3 in thick weighs about 18.3 tons per 1,000 sq ft (16.6 t). Crack fill is priced by the linear foot and striping by the stall.

By the AreaPal team · Updated

Coats
You need
27 gal
Sealer
5 gallon pails
6 pails
Or 55 gallon drums
1 drums
Area
1,200 sq ft

90 sq ft per gallon per coat. Same math as the AreaPal app's sealcoat estimate.

How it works

From the paving and sealcoat job to a signed quote.

house113 ft99 ft4 ft gate
1Measure

Search the address and draw the line, the lawn, the drive or the roof on the satellite map.

Posts, 4×4×830
Rails, 2×4×878
Pickets, 1×6477
Concrete, 50 lb bags62
2Estimate

Materials with waste, labor, markup and tax, from your own price book.

Chain link$4,984.62
Wood privacy$7,367.00
White vinyl$11,940.00
3Quote

Up to three options with your logo. Send the link from your own phone.

$7,367.00Lisa Moreno · Sat Nov 14, 9:41 AM
4Approved

Your customer picks an option and signs with a finger. No app, no account.

How to estimate

Paving and sealcoat estimates, step by step.

Example: Brookside Church, east lot, 6,200 sq ft, two coats

138 gal of sealer. Here is what the estimate counts, line by line. Sealcoating calculator: gallons by coats to change the numbers.

For Brookside Church, east lot, 6,200 sq ft, two coats, line by line
ItemNoteQty
Sealer, mixed2 coats at 90 sq ft a gallon138 gal
Sealer in 5 gal pailsrounded up28
Sealcoat laborby the square foot6,200 sq ft
Quote totalviewed 3 times$2,980.00

Don’t know the length or the area? Measure it on the satellite map in AreaPal.

How many gallons of sealcoat per square foot?

Sealcoat covers about 70 to 95 sq ft per gallon of mixed sealer per coat, so two coats on 1,000 sq ft take 21 to 29 gallons; 80 sq ft per gallon (25 gallons for two coats) is a fair default.

The rate on the data sheet is per gallon of mixed material, after water and sand. Old, porous asphalt takes more; smooth, recently sealed pavement goes further. Gallons = area × coats ÷ coverage, rounded up to whole pails or totes.

Sealcoat gallons by area and coats
Area1 coat at 80 sq ft/gal2 coats at 80 sq ft/gal2 coats at 90 sq ft/gal
600 sq ft (one-car drive)7.5 gal15.0 gal13.3 gal
1,000 sq ft12.5 gal25.0 gal22.2 gal
1,500 sq ft (two-car drive)18.8 gal37.5 gal33.3 gal
6,200 sq ft (small church lot)77.5 gal155.0 gal137.8 gal
10,000 sq ft125.0 gal250.0 gal222.2 gal
43,560 sq ft (1 acre)544.5 gal1,089.0 gal968.0 gal

How many tons of asphalt do I need?

Asphalt tons = area in sq ft × thickness in inches × 0.00611, which assumes compacted hot mix at 110 lb per square yard per inch (about 147 lb per cubic foot).

Per square yard it is sq yd × inches × 0.055. Add about 5 % for edges and handwork. A 1,500 sq ft driveway at 3 in is 27.5 tons, 28.9 with waste, so order 29 tons and plan the truck loads from there.

Asphalt tons per 1,000 sq ft by compacted thickness
ThicknessUS tons per 1,000 sq ftMetric tonnes per 100 m²
1.5 in (38 mm, overlay)9.17 t8.95 t
2 in (51 mm, driveway surface)12.22 t11.93 t
3 in (76 mm, driveway, one lift)18.33 t17.90 t
4 in (102 mm, parking lot)24.44 t23.87 t

How do you estimate crack filling?

Crack filling is measured and priced by the linear foot of crack, and the filler, hot pour or cold pour, is bought by the box or jug.

Walk the lot or trace the cracks as lines and total their length. Clean and dry each crack before filling, and fill before the first coat of sealer. Alligator cracking and potholes are patch work, priced by the square foot, not crack fill.

How do you price a sealcoating job?

Price a sealcoating job per square foot of pavement: sealer by the gallon, labor by the square foot, crack fill by the foot, then mobilization, markup and tax.

Commercial lots often add restriping in the same visit. In AreaPal’s example quotes, Brookside Church's east lot, 6,200 sq ft, was quoted at $2,980.00; Riverside Plaza was approved at $10,168.00.

What goes into a sealcoating estimate
LineMeasured asPriced per
Sealerarea × coats ÷ coveragegallon
Sand and additivethe sealer's mix designbag or gallon
Crack filllinear feet of crackfoot
Sealcoat laborsquare feet of pavementsquare foot
Restripingstalls and stencilsstall
Mobilizationone per jobjob

How many coats of sealcoat does a lot need?

Two coats of sealcoat is the usual spec for driveways and parking lots, with a third coat on entrances and drive lanes that take the most traffic.

Quote the coats on the estimate so a customer comparing prices sees what each bid includes. One thin coat is the most common reason two quotes for the same lot differ.

What does sealcoating and paving cost in 2026?

Professional sealcoating costs the customer $0.17 to $0.24 per sq ft (LawnStarter, 2026), though Fixr (2025) gives $0.88 to $2.10, and a new asphalt driveway costs $3.92 to $6.25 per sq ft installed (LawnStarter, 2026).

Typical paving and sealcoat costs, US
JobTypical costSource
professional driveway sealcoatingProfessional sealcoating$0.17–$0.24 per sq ftLawnStarter, October 2026
asphalt driveway sealcoatingProfessional sealcoating$0.88–$2.10 per sq ftFixr, January 2025
asphalt driveway installedInstalled; average $5.09 per sq ft$3.92–$6.25 per sq ftLawnStarter, October 2026

What a contractor charges the customer. US, read November 2026. Not AreaPal's price.

Sources: SealMaster technical data sheets (sealer coverage of 70–95 sq ft per gallon per coat, mixed); the 110 lb per sq yd per inch yield for compacted hot mix asphalt used in state DOT paving specifications; typical costs, what a contractor charges the customer: LawnStarter asphalt driveway cost guide (October 2026) and Fixr asphalt driveway cost guide (January 2025), which disagree on sealcoating.

Every paving job

Seal, fill or pave. Each one measured its way.

A freshly paved black asphalt driveway in front of a small brick house
Photo: Dillon Kydd / Unsplash
Driveway sealcoatingSquare feetCoatsGallons
An empty asphalt parking lot with painted lines and a light pole in front of a warehouse
Photo: Raymond Kotewicz / Unsplash
Parking lot sealcoatingCoatsCrack fillStriping
A close view of a crack running through worn asphalt
Photo: Anastasia R. / Unsplash
Crack fillingLinear feetBoxesHot pour
A road roller compacting fresh black asphalt next to a traffic cone
Photo: Michael Evans / Unsplash
Asphalt pavingTonsThicknessTrucks
AlsoOverlaysHot patchAsphalt millingsLine stripingPressure washing

Photos by Dillon Kydd, Raymond Kotewicz, Anastasia R., Michael Evans on Unsplash.

After you send it

Every quote, tracked to a yes.

Quotes with their status, options your customer can compare, and every client with their areas.

Quotes list with statuses and a viewed push
Know where every quote stands

Sent, viewed, approved, declined or expired, with a push when a customer opens one.

Quote 1042 with three options: $4,984.62, $7,367.00 and $11,940.00
Good, better, best

Up to three options on one quote, with your logo, terms and a valid-until date.

Lisa Moreno's client card with her areas and quotes
Clients and their areas

Every customer with the areas you measured and the quotes they have had.

Questions

Paving and sealcoat questions, answered.

What should an asphalt calculator app do?

Measure the pavement, turn it into gallons of sealer, tons of mix and feet of crack, then price it with your own costs. AreaPal measures the lot on the satellite map, estimates sealcoat, crack fill, asphalt and striping, and sends a quote the customer approves from a link.

How often should a driveway be sealcoated?

Every two to three years for most residential driveways, sooner on lots with heavy traffic or a lot of sun. Sealing more often than the old coat wears builds up and can peel.

When is it too cold to sealcoat?

Most sealer makers ask for air and pavement at 50 °F (10 °C) and rising, with no rain for 24 hours. Check your product's data sheet before booking late-season jobs.

Can I measure a parking lot from a satellite map?

Yes, when the pavement is visible from above. Draw the lot, cut out islands and buildings, and draw cracks as lines to get their total length. Check areas under trees on site.

Should I quote striping with the sealcoat?

Yes. Sealcoat covers the old lines, so lots are restriped once the sealer dries. Quoting both together saves a second trip and a second approval.

AreaPal for iPhone

Measure the lot.
Get the sealcoat signed.

Download on the App Store
Quotes in AreaPal: Brookside Church sealcoat, east lot 6,200 sq ft, $2,980.00, viewed 3 times
Quote paving and sealcoat jobs from the truckAreaPal on the App StoreGet