How much does a concrete slab cost?

A concrete slab costs $4.34 to $7.73 per square foot installed (LawnStarter, 2026), and This Old House gives $4 to $8 per square foot (2026). That is what a contractor charges the customer, not AreaPal's price. To price your slab, multiply its area by the range: a 12x12 slab is 144 sq ft, a 30x30 slab 900 sq ft.

The AreaPal team · Updated · 6 min read
A quote in AreaPal with three options, ready to send to the customer

The short answer

  • A concrete slab costs $4.34 to $7.73 per sq ft installed (LawnStarter, 2026); This Old House gives $4 to $8 (2026).
  • Ready-mix concrete costs $175 to $195 per cubic yard delivered (Fixr, 2025); This Old House gives $113 to $126 per cubic yard (2026).
  • Slab cost is area × price per sq ft: a 12x12 slab is 144 sq ft and a 20x20 slab 400 sq ft.
  • To estimate your slab, multiply its square feet by the range, then add extras and removal.

How much does a concrete slab cost per square foot?

A concrete slab costs $4.34 to $7.73 per square foot installed, according to LawnStarter (2026). This Old House gives $4 to $8 per square foot (2026). That is what a contractor charges the customer, not AreaPal’s price.

Concrete slab cost per square foot
JobTypical costSource
concrete slab installedInstalled; average $6.60 per sq ft$4.34–$7.73 per sq ftLawnStarter, November 2026
concrete slabTypical slab range$4–$8 per sq ftThis Old House, March 2026

What a contractor charges the customer. US, read November 2026. Not AreaPal's price.

Thicker slabs cost more per square foot, because they take more concrete. The concrete per 100 sq ft by thickness, before waste:

Concrete needed per 100 sq ft of slab
ThicknessConcrete per 100 sq ft
4 in1.23 cu yd
5 in1.54 cu yd
6 in1.85 cu yd

How much does concrete cost per cubic yard?

Ready-mix concrete costs $175 to $195 per cubic yard delivered, according to Fixr (2025). This Old House gives $113 to $126 per cubic yard (2026). The two sources disagree, so the table shows both. One cubic yard covers 81 sq ft at 4 in thick, or 54 sq ft at 6 in.

Concrete per cubic yard
JobTypical costSource
concrete per cubic yardConcrete only; delivery not stated$113–$126 per cubic yardThis Old House, March 2026
ready-mix concrete deliveredDelivered; $125–$133 per cu yd without delivery, plus a short-load fee of $15–$17 per cu yd on small orders$175–$195 per cubic yardFixr, January 2025

What a contractor charges the customer. US, read November 2026. Not AreaPal's price.

Small orders often cost more per yard: many plants charge a short-load fee on less than a full truck, so ask for the minimum load and the fee when you call.

How much does a 12x12, 20x20 or 30x30 slab cost?

A slab costs its area in square feet times the price per square foot: $4.34 to $7.73 installed, according to LawnStarter (2026). The areas and concrete volumes for common sizes:

Common slab sizes: area and concrete at 4 in thick
Slab sizeAreaConcrete at 4 in
10 × 10 ft100 sq ft1.23 cu yd
12 × 12 ft144 sq ft1.78 cu yd
20 × 20 ft400 sq ft4.94 cu yd
24 × 24 ft576 sq ft7.11 cu yd
30 × 30 ft900 sq ft11.11 cu yd
30 × 40 ft1,200 sq ft14.81 cu yd

Concrete volumes are before waste; order a little extra so the truck does not come up short.

What drives the cost of a concrete slab?

The cost of a concrete slab depends mostly on its area and thickness, then on reinforcement, finish, site access and local prices. The things that push a quote up:

  • Thickness and use. Driveways and garage floors are poured thicker and often reinforced, so they cost more per square foot than a patio.
  • Reinforcement. Wire mesh or rebar is priced on top of a plain slab.
  • Finish. Stamped and stained concrete cost more than a plain broom finish.
  • Site and access. A truck that cannot reach the forms needs a pump or wheelbarrows, and sloped or soft ground needs grading and a compacted gravel base.
  • Removal and permits. Breaking out an old slab, permits and inspections come on top.

How do you estimate the cost of your own slab?

You estimate a slab by measuring its square feet, multiplying by the per-square-foot range, then adding extras. Volume tells you how much concrete to order:

  1. Measure length × width in feet for each rectangle, and add them.
  2. Multiply the area by $4.34 to $7.73 for a plain slab (LawnStarter, 2026).
  3. Add reinforcement, finish and removal as separate lines.
  4. For the order, area × thickness in feet ÷ 27 gives cubic yards. A 1,500 sq ft pour at 4 in needs 18.5 cu yd.

The concrete calculator does the volume and bags; the guide on how to pour a concrete slab covers the base, forms and finishing. Contractors can see how slabs are measured and priced on the concrete contractors page.

One slab, three options on one quote
One slab, three options on one quote

A contractor can price plain, reinforced and stamped versions of the same slab and send them as options on one quote. The customer picks one, approves it and signs in the browser.

Up to 3 optionsSigned in the browser
Measure the slab, then price itDraw the pour on the map in AreaPal, set the thickness and send a quote with options.Download on the App Store

Questions

How much does it cost to pour a concrete slab yourself?

Ready-mix costs $175 to $195 per cubic yard delivered (Fixr, 2025), and one cubic yard covers 81 sq ft at 4 in thick. Forms, base gravel, mesh or rebar and tool rental come on top, and finishing a large slab by hand takes a crew.

How much does a 20x30 concrete slab cost?

A 20x30 slab is 600 sq ft, so multiply 600 by LawnStarter's 2026 range of $4.34 to $7.73 per sq ft installed for the low and high price. At 4 in thick it needs about 7.4 cubic yards of concrete before waste.

Is a 6 inch slab much more expensive than 4 inch?

A 6 in slab uses 50% more concrete than a 4 in slab, but concrete is only part of the installed price, so the total per square foot rises by much less than half. Driveways and garage floors that carry vehicles are usually poured thicker.

How much does a concrete slab foundation cost?

A slab foundation costs more per square foot than a plain slab, because footings, insulation and plumbing go in under it. The $4.34 to $7.73 per sq ft range (LawnStarter, 2026) is for plain slabs, so get quotes for the building's own design.

Sources: Typical installed costs, what a contractor charges the customer (US): LawnStarter, concrete slab price (updated November 3, 2026); This Old House, concrete slab cost (updated March 17, 2026); Fixr, concrete delivery cost (updated January 31, 2025). Read November 2026. Volumes: 1 cu yd = 27 cu ft.

Keep reading

Photos by Markus Kammermann, Scott Webb, QY Liu on Unsplash.

Measure it tonight.
Then price it from the same app.

Draw or walk the land in AreaPal, then save it, export it, or turn it into a quote.

Download on the App Store
Measure any landAreaPal on the App StoreGet