Concrete block calculator

A standard 8 × 8 × 16 in concrete block covers 0.89 square feet of wall, so 1.125 blocks per square foot. Count whole blocks per course (length × 12 ÷ 16) times courses (height × 12 ÷ 8) and add 5%. A 40 ft wall 4 ft high takes 189 blocks.

Updated · Same math as the AreaPal app's estimates

How many concrete blocks do I need?

Redraws as you type
First 24 of 40 ft drawn189
Blocks, 8 × 8 × 16 in, +5%

189blocks

Blocks per course

30blocks

Courses

6courses

Typical cost at these sizes

$3,019–$3,867

CMU block wall installed, $18.87–$24.17 per sq ft, from HomeWyse, May 2026
Footing, 16 × 8 in
1.4 yd³

Standard 8 × 8 × 16 in CMU, 5% waste. Footing as in the AreaPal app's block-wall estimate.

Step 2 · the real size

Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

  1. Draw it on the map

    Tap the corners on the satellite view, or walk the edge with GPS.

    Satellite map or GPS walk
  2. Get the exact area

    Square feet, acres and every edge length, as you tap.

    Cut-outs taken off
  3. Count it and quote it

    The estimate counts the materials; the quote prices them with your own costs.

    Same math as this page
  4. AreaPal on iPhone with a field outlined on the satellite mapDownload on the App Store
The formula

How do you calculate concrete blocks for a wall?

Blocks per course = length (ft) × 12 ÷ 16, rounded up. Courses = height (ft) × 12 ÷ 8, rounded up. Blocks = per course × courses × 1.05 for cuts and breakage. The footing under it (16 × 8 in) is length × 16/12 × 8/12 ÷ 27 cubic yards.

Worked example

A garden wall 24 ft long and 3 ft high: 24 × 12 ÷ 16 = 18 blocks per course; 3 × 12 ÷ 8 = 4.5, so 5 courses; 18 × 5 = 90 blocks, plus 5% = 95 blocks. Its 16 × 8 in footing takes 0.8 yd³ of concrete.

Rule of thumb

How many blocks for each wall size?

Blocks for a wall, 8 × 16 in face, 5% waste
WallCoursesBlocks
20 × 3 ft579
40 × 4 ft6189
50 × 6 ft9360
100 × 4 ft6473
100 × 8 ft12945
Typical job cost

Concrete block job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

Concrete block job cost, US, from cost guides read November 2026
JobTypical costSource
CMU block wall installedMaterials, labor, supplies and equipment; before a general contractor's markup and sales tax$18.87–$24.17 per sq ftHomeWyse, May 2026
Related calculators

Work out the rest of the job

Questions

Concrete blocks, answered

How many concrete blocks per square foot?

1.125 standard 8 × 16 in blocks per square foot of wall face, before waste.

How many blocks are in a pallet?

Commonly 90 of the 8 × 8 × 16 in block, but it varies by plant; check your supplier.

How much mortar for a block wall?

A rough rule is one 80 lb bag of mortar mix per 30 to 35 blocks with 3/8 in joints.

How much does a concrete block weigh?

A standard 8 × 8 × 16 in hollow block weighs about 35 to 40 lb, depending on the mix; lightweight blocks are closer to 28 lb.

Should I fill concrete blocks with concrete?

Cores with rebar are filled with grout or concrete in reinforced and retaining walls; a garden wall often only has its top course or rebar cells filled. Follow the plans and local code.

Sources: Standard CMU face 8 × 16 in (nominal, with 3/8 in joints), 5% waste and a 16 × 8 in footing: AreaPal app rules.

Measure the real area first.
Then count the materials.

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.

Download on the App Store
Measure the real areaAreaPal on the App StoreGet