Paver calculator

Standard 4 × 8 in pavers take 4.5 pavers per square foot, plus 10% for herringbone cuts (5% for running bond). A 12 × 16 ft patio (192 sq ft) in herringbone needs 951 pavers, 6 tons of gravel base at 6 in and 1 yd³ of bedding sand.

Updated · Same math as the AreaPal app's estimates

How many pavers do I need?

Pattern
Redraws as you type
16 ft12 ft951
Pavers, 4 × 8 in, with waste

951pavers

Or pallets (110 sq ft)

2pallets

Gravel base, 6 in compacted

6tons

Typical cost at these sizes

$1,920–$4,608

Paver patio installed, $10–$24 per sq ft, from LawnStarter, November 2026
Bedding sand, 1 in
1 yd³
Polymeric sand, 50 lb
4 bags
Edge restraint, 8 ft pieces
7 pieces
Area
192 sq ft

Pattern waste 5–15%, base compaction 20%. Same math as the AreaPal app's paver estimate.

Step 2 · the real size

Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

  1. Draw it on the map

    Tap the corners on the satellite view, or walk the edge with GPS.

    Satellite map or GPS walk
  2. Get the exact area

    Square feet, acres and every edge length, as you tap.

    Cut-outs taken off
  3. Count it and quote it

    The estimate counts the materials; the quote prices them with your own costs.

    Same math as this page
  4. AreaPal on iPhone with a field outlined on the satellite mapDownload on the App Store
The formula

How do you calculate pavers for a patio?

Pavers = area × (1 + pattern waste) × pavers per sq ft (4.5 for 4 × 8 in). Pallets = laid area ÷ pallet coverage (about 110 sq ft). Base = area × 6 in ÷ 12 ÷ 27 × 1.20 for compaction × 1.40 t per yd³. Sand = area × 1 in ÷ 12 ÷ 27. Polymeric sand: one 50 lb bag per 60 sq ft.

Rule of thumb

How much waste for each paver pattern?

Waste to add by laying pattern
PatternWaste4 × 8 in pavers per 100 sq ft
Running bond5%473
Basket weave5%473
Herringbone 90°10%495
Herringbone 45°15%518
Circles and fans15%518
Typical job cost

Paver job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

Paver job cost, US, from cost guides read November 2026
JobTypical costSource
Paver patio installedInstalled, labor and materials$10–$24 per sq ftLawnStarter, November 2026
Paver patio installedInstalled$8–$25 per sq ftThis Old House, June 2026
Paver base

How much paver base do I need?

Under a patio, pavers sit on 4 to 6 in of compacted gravel base. At 6 in, with 20% for compaction at 1.40 tons per yard, 100 sq ft takes 3.11 tons. A 12 × 16 ft patio needs 6 tons.

You need
6 tons
Gravel base, in ½ ton steps
Or cubic yards
4.5 yd³
Area
192 sq ft

20% compaction, 1.40 t per yd³. Same math as the AreaPal app's paver estimate.

Tons = area × depth (in) ÷ 12 ÷ 27 × 1.20 × 1.40. The 20% is how much the base shrinks when it's compacted in 2 in lifts with a plate compactor.

Compacted paver base per 100 sq ft
DepthTonsCubic yards
4 in2.071.48
6 in3.112.22
8 in4.152.96
12 in6.224.44
Slope

What slope does my patio need?

Slope (%) = rise ÷ run × 100. A patio or walk should fall about 1/4 in per foot (2%) away from the house. Over 10 ft that's 2½ in of drop. Type your rise in inches and the run in feet for percent, degrees and inches per foot.

You need
2.08 %
Slope
Inches per foot
0.25 in/ft
Angle
1.19 °

Rise in inches, run in feet.

Percent = rise ÷ run × 100, with both in the same unit. Degrees = arctan(rise ÷ run). Inches per foot = rise (in) ÷ run (ft).

Slope in inches per foot, percent and degrees
Per footPercentDegreesDrop over 10 ft
0.125 in1.04%0.6°1.25 in
0.25 in2.08%1.19°2.5 in
0.5 in4.17%2.39°5 in
1 in8.33%4.76°10 in
2 in16.67%9.46°20 in
Related calculators

Work out the rest of the job

Questions

Pavers, answered

How many pavers are in a square foot?

4.5 of the common 4 × 8 in (holland) paver. Larger pavers: about 2 per sq ft for 6 × 9 in, 1 per sq ft for 12 × 12 in.

How deep should the base be under pavers?

4 to 6 in of compacted gravel for a patio or walk, 8 to 12 in for a driveway, plus 1 in of bedding sand on top.

How much extra pavers should I buy?

5% for straight running bond, 10% for 90° herringbone and 15% for 45° herringbone, circles or lots of curves.

How deep should paver base be?

4 to 6 in for walks and patios, 8 to 12 in for driveways, more on clay.

How much slope does a patio need?

About 1/4 in per foot, 2%, away from the house; 1/8 in per foot is the minimum for drainage.

Sources: 4.5 pavers per sq ft for 4 × 8 in pavers by geometry. Pattern waste (5–15%), 20% base compaction at 1.40 t per cu yd, 1 in of bedding sand and 60 sq ft per bag of polymeric sand: AreaPal app rules. The paver and sand makers' figures govern.

Measure the real area first.
Then count the materials.

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.

Download on the App Store
Measure the real areaAreaPal on the App StoreGet