Roofing calculator

A roof's area is the house footprint × the pitch factor: 1.118 for a 6/12 roof. One roofing square is 100 sq ft and takes 3 bundles of architectural shingles; add 10% for waste. A 40 × 30 ft house at 6/12 has 1,342 sq ft of roof, 13.4 squares, and needs 45 bundles.

Updated · Same math as the AreaPal app's estimates

How many squares and bundles do I need?

Pitch (rise per 12)
Redraws as you type
12630 ft span13.4 sq
Shingle bundles, 3 per square, +10%

45bundles

Roof squares (100 sq ft)

13.4sq

Roof area

1,342sq ft

Typical cost at these sizes

$4,615–$16,100

Asphalt shingle roof installed, $3.44–$12 per sq ft, from This Old House, March 2026
Underlayment rolls (10 sq)
2 rolls
Drip edge, 10 ft pieces
14 pieces
Starter strip bundles
2 bundles
Ice and water shield, 66 ft rolls
3 rolls
Coil nails, boxes
2 boxes

Footprint × pitch factor, 10% waste, a gable roof with eaves on the long sides. Same math as the AreaPal app's roofing estimate.

Step 2 · the real size

Measure the real job in AreaPal

A typed rectangle is a guess. Draw the outline on the satellite map and the estimate uses the exact area, with the same math as this calculator.

  1. Draw it on the map

    Tap the corners on the satellite view, or walk the edge with GPS.

    Satellite map or GPS walk
  2. Get the exact area

    Square feet, acres and every edge length, as you tap.

    Cut-outs taken off
  3. Count it and quote it

    The estimate counts the materials; the quote prices them with your own costs.

    Same math as this page
  4. AreaPal on iPhone with a field outlined on the satellite mapDownload on the App Store
The formula

How do you calculate roofing squares?

Roof area = footprint (sq ft) × √(1 + (pitch ÷ 12)²). Squares = roof area ÷ 100. Bundles = squares × 1.10 × 3. Underlayment: one roll per 10 squares. Drip edge: eaves and rakes ÷ 10 ft pieces. Starter: eaves ÷ 105 ft per bundle. Overhangs add area, so measure the footprint at the drip line.

Rule of thumb

What is the pitch factor for each roof pitch?

Pitch factor: roof area per sq ft of footprint
PitchFactorAngleSquares per 1,000 sq ft of footprint
2/121.0149.5°10.1
3/121.03114°10.3
4/121.05418.4°10.5
5/121.08322.6°10.8
6/121.11826.6°11.2
7/121.15830.3°11.6
8/121.20233.7°12
9/121.2536.9°12.5
10/121.30239.8°13
12/121.41445°14.1
Typical job cost

Roofing job cost: what contractors charge

Ranges from public cost guides, as each one states them. They're what a contractor charges for the work, not material prices and not AreaPal's. A real quote starts with measuring the job.

Roofing job cost, US, from cost guides read November 2026
JobTypical costSource
Asphalt shingle roof installedInstalled; labor is about 60% of the cost$3.44–$12 per sq ftThis Old House, March 2026
Asphalt shingle roof installedInstalled; 3-tab $3–$5, architectural $4–$8 per sq ft; tear-off may be extra at $50–$150 per square$3–$8 per sq ftFixr, January 2026
Shingle roof installed (all shingle types)Installed, all shingle types$400–$1,800 per square (100 sq ft)Fixr, January 2026
Metal roofing

How many metal roofing panels do I need?

Exposed-fastener metal panels cover about 36 in of width each and run from eave to ridge. For a gable roof, panels per side = roof length × 12 ÷ 36, rounded up; each panel is the rafter length. A 40 ft roof takes 14 panels per side, 28 in all.

Panel coverage
You need
28 panels
Panels, both sides
Per side
14 panels
Panel length
16 ft
Metal, +5%
1,344 sq ft

Gable roof, two equal sides.

Panels per side = roof length (ft) × 12 ÷ coverage width (in), rounded up. Panels = per side × 2 for a gable. Panel length = rafter length, eave to ridge, plus overhang. Order trim, closures and screws to match.

Panels per side by roof length
Roof length36 in panels24 in panels16 in panels
20 ft71015
30 ft101523
40 ft142030
60 ft203045
Related calculators

Work out the rest of the job

Questions

Roofing, answered

How many bundles of shingles are in a square?

Three bundles of architectural or three-tab shingles cover one square, 100 sq ft. Some heavy designer shingles take four or five.

How do I calculate roof square footage?

Multiply the footprint (including overhangs) by the pitch factor: 1.054 for 4/12, 1.118 for 6/12, 1.202 for 8/12, 1.414 for 12/12.

How much waste should I add for shingles?

10% for a simple gable roof, 15% or more for hips, valleys and dormers, because of the cut pieces.

How do I measure a roof without climbing it?

Measure the footprint from the ground or on the satellite map, then apply the pitch factor. The AreaPal app measures the outline from above and keeps the area for the estimate.

How wide is a metal roofing panel?

Exposed-fastener panels are commonly 36 in of coverage; standing seam panels are often 12 to 18 in.

Sources: Pitch factor √(1 + (rise ÷ 12)²) by geometry. 3 bundles per square is standard shingle packaging (check your wrapper). 10% waste, 10 squares per underlayment roll, 105 ft per starter bundle and 33 ft per ridge cap bundle: AreaPal app rules.

Measure the real area first.
Then count the materials.

Draw the slab, bed, drive or fence line on the satellite map in AreaPal, and the estimate uses the same math as this calculator.

Download on the App Store
Measure the real areaAreaPal on the App StoreGet