Roofing estimating software.
Squares by pitch, quoted from the truck.
Roofing estimating software counts squares: 1 square is 100 sq ft (9.29 m²) of roof surface. Multiply the footprint, overhangs included, by the pitch factor, 1.202 at 8/12, and divide by 100. A 2,190 sq ft footprint at 8/12 is 26.32 squares; shingles take 3 bundles a square, plus 10 to 15% waste.
By the AreaPal team · Updated
- Roof squares (100 sq ft)
- 13.4 sq
- Roof area
- 1,342 sq ft
- Underlayment rolls (10 sq)
- 2 rolls
- Drip edge, 10 ft pieces
- 14 pieces
- Starter strip bundles
- 2 bundles
- Ice and water shield, 66 ft rolls
- 3 rolls
- Coil nails, boxes
- 2 boxes
Footprint × pitch factor, 10% waste, a gable roof with eaves on the long sides. Same math as the AreaPal app's roofing estimate.
From the roofing job to a signed quote.
Search the address and draw the line, the lawn, the drive or the roof on the satellite map.
Materials with waste, labor, markup and tax, from your own price book.
Up to three options with your logo. Send the link from your own phone.
Your customer picks an option and signs with a finger. No app, no account.
Roofing estimates, step by step.
Example: a 2,190 sq ft footprint at 8/12 pitch
26.32 squares. Here is what the estimate counts, line by line. Roofing calculator: squares, bundles and underlayment to change the numbers.
| Item | Note | Qty |
|---|---|---|
| Roof surface | 2,190 sq ft × 1.202 pitch factor | 2,632 sq ft |
| Shingles, 3 bundles a square | +10 % waste, 28.95 squares | 87 bundles |
| Synthetic underlayment | 10 squares a roll | 3 rolls |
| Install | by the square | 26.32 sq |
Don’t know the length or the area? Measure it on the satellite map in AreaPal.
How do you calculate roofing squares?
Roofing squares = roof surface in sq ft ÷ 100, and the roof surface is the footprint, overhangs included, times the pitch factor.
Trace the drip line, not the walls, so the eaves and rakes count. A 2,190 sq ft footprint at 8/12 is 2,190 × 1.202 = 2,632 sq ft of roof, 26.32 squares before waste.
| Footprint | 4/12 | 6/12 | 8/12 | 10/12 |
|---|---|---|---|---|
| 1,500 sq ft (139 m²) | 15.81 | 16.77 | 18.03 | 19.53 |
| 2,000 sq ft (186 m²) | 21.08 | 22.36 | 24.04 | 26.03 |
| 2,190 sq ft (203 m²) | 23.08 | 24.48 | 26.32 | 28.51 |
| 2,500 sq ft (232 m²) | 26.35 | 27.95 | 30.05 | 32.54 |
| 3,000 sq ft (279 m²) | 31.62 | 33.54 | 36.06 | 39.05 |
What is the pitch factor for a roof?
The pitch factor is the slope multiplier √(1 + (rise ÷ 12)²): 1.054 for a 4/12 roof, 1.118 for 6/12 and 1.202 for 8/12.
Pitch is the rise in inches per 12 in of run. Read it with a level and a tape at the gable end or from a ladder at the eave; it cannot be seen on a satellite map.
| Pitch | Angle | Pitch factor | Extra roof area |
|---|---|---|---|
| 3/12 | 14.0° | 1.031 | 3.1 % |
| 4/12 | 18.4° | 1.054 | 5.4 % |
| 5/12 | 22.6° | 1.083 | 8.3 % |
| 6/12 | 26.6° | 1.118 | 11.8 % |
| 7/12 | 30.3° | 1.158 | 15.8 % |
| 8/12 | 33.7° | 1.202 | 20.2 % |
| 9/12 | 36.9° | 1.250 | 25.0 % |
| 10/12 | 39.8° | 1.302 | 30.2 % |
| 12/12 | 45.0° | 1.414 | 41.4 % |
How many bundles of shingles per square?
Standard three-tab and architectural shingles come 3 bundles to a square, so bundles = squares × 3 plus waste; some heavy designer shingles take 4 or 5 bundles a square.
Waste depends on how cut up the roof is. 26.32 squares with 10 % waste is 28.95 squares, 87 bundles.
| Roof | Waste to add | Bundles for 26.32 squares |
|---|---|---|
| Simple gable | 10 % | 87 |
| Hip roof | 15 % | 91 |
| Valleys, dormers, many cuts | 15–20 % | 91–95 |
What else goes on a roofing material list?
Besides shingles, a roofing material list has underlayment by the square, ice and water shield at eaves and valleys, drip edge and starter by the foot, ridge cap by the foot of ridges and hips, and nails.
| Material | Measured by | Typical package |
|---|---|---|
| Synthetic underlayment | squares of roof | about 10 squares a roll |
| Ice and water shield | feet of eave and valley | about 2 squares a roll |
| Drip edge | feet of eave and rake | 10 ft pieces |
| Starter strip | feet of eave and rake | about 100–120 ft a bundle |
| Ridge cap | feet of ridge and hip | about 20–33 ft a bundle |
| Roofing nails | squares | about 250–320 nails a square, 4 per shingle |
How do you measure a roof without climbing it?
You can measure a roof without climbing it by tracing its outline, overhangs included, on a satellite map and multiplying by the pitch factor for the pitch you read at the gable end.
In AreaPal you draw the roof outline on the map, type the pitch on the estimate and get squares, bundles and the other lines from your own price book. Check skylights, chimneys and hidden valleys on site before you send the final quote.
What does a new roof cost in 2026?
An installed asphalt shingle roof costs the customer $3 to $8 per sq ft (Fixr, 2026); This Old House (2026) gives $3.44 to $12 per sq ft.
| Job | Typical cost | Source |
|---|---|---|
| asphalt shingle roof installedInstalled; labor is about 60% of the cost | $3.44–$12 per sq ft | This Old House, March 2026 |
| asphalt shingle roof installedInstalled; 3-tab $3–$5, architectural $4–$8 per sq ft; tear-off may be extra at $50–$150 per square | $3–$8 per sq ft | Fixr, January 2026 |
| shingle roof installed (all shingle types)Installed, all shingle types | $400–$1,800 per square (100 sq ft) | Fixr, January 2026 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
Sources: Pitch factor from geometry, √(1 + (rise ÷ 12)²); GAF and Owens Corning product data (3 bundles a square for standard shingles, roll and bundle coverage, 4 nails a shingle); typical costs, what a contractor charges the customer: Fixr asphalt roof shingles installation and roof shingles installation cost guides (January 2026), This Old House shingle roof cost (March 2026).
Shingle, metal or tear-off. Each one counted by the square.




Photos by Martin Leitgeb, Earl Wilcox, Zohair Mirza, Taylor Hammersla on Unsplash.
Every quote, tracked to a yes.
Quotes with their status, options your customer can compare, and every client with their areas.

Sent, viewed, approved, declined or expired, with a push when a customer opens one.

Up to three options on one quote, with your logo, terms and a valid-until date.

Every customer with the areas you measured and the quotes they have had.
Roofing questions, answered.
What should roofing estimating software do?
Measure the roof, turn the pitch into squares, list shingles, underlayment, drip edge and ridge cap, and price it all with your own costs. AreaPal measures the outline on the satellite map, takes the pitch you type and sends a quote with up to three options the homeowner signs.
How many square feet are in a roofing square?
One roofing square is 100 sq ft (9.29 m²) of roof surface, not of footprint. A roof with 2,632 sq ft of surface is 26.32 squares.
Can I measure a roof from a satellite map?
Yes for the outline and the footprint, when the roof is clear of trees. The pitch cannot be seen from above, so read it on site or from the plans and type it on the estimate.
Is a metal roof estimated the same way?
The area is: squares by footprint and pitch. Panels are then ordered by length per run, with trim and fasteners from the panel maker's guide.
Do overhangs count in the roof area?
Yes. Shingles cover the eaves and rakes too, so measure to the drip line. Measuring to the walls can leave a 2,000 sq ft house a square or more short.

