The short answer
- Professional sealcoating costs $0.17 to $0.24 per sq ft (LawnStarter, 2026); Fixr gives $0.88 to $2.10 (2025).
- The sources disagree widely, so measure the driveway and get local quotes for that area.
- A new asphalt driveway costs $3.92 to $6.25 per sq ft installed (LawnStarter, 2026).
- Large lots cost less per square foot than a single driveway.
How much does driveway sealing cost per square foot?
Professional driveway sealcoating costs $0.17 to $0.24 per square foot according to LawnStarter (2026), and $0.88 to $2.10 according to Fixr (2025). The two sources disagree by a wide margin, so the table shows both, and a local quote for your measured area is the number to trust.
| Job | Typical cost | Source |
|---|---|---|
| professional driveway sealcoatingProfessional sealcoating | $0.17–$0.24 per sq ft | LawnStarter, October 2026 |
| asphalt driveway sealcoatingProfessional sealcoating | $0.88–$2.10 per sq ft | Fixr, January 2025 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
How much does sealcoating a driveway cost in total?
Sealcoating a whole driveway costs its area in square feet times the price per square foot. Common driveway sizes:
| Driveway | Area |
|---|---|
| 10 × 20 ft | 200 sq ft |
| 20 × 20 ft | 400 sq ft |
| 24 × 24 ft | 576 sq ft |
| 24 × 36 ft | 864 sq ft |
Small driveways often pay a minimum charge, so the total for a short drive can be more than its area alone suggests.
What is not in the sealcoat price?
The sealcoat price covers cleaning and spreading the sealer. Repairs are priced on their own lines:
- Crack filling. Priced by the linear foot of crack, and done before the first coat.
- Patching. Alligator cracking and potholes are cut out and patched, priced by the square foot.
- Oil spots and washing. Heavy stains need priming, and a dirty drive needs washing first.
How much does a new asphalt driveway cost?
A new asphalt driveway costs $3.92 to $6.25 per square foot installed, according to LawnStarter (2026). Resurfacing an old driveway with an overlay and tearing out and rebuilding are priced differently, so ask which one a quote is for.
| Job | Typical cost | Source |
|---|---|---|
| asphalt driveway installedInstalled; average $5.09 per sq ft | $3.92–$6.25 per sq ft | LawnStarter, October 2026 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
What drives the cost of sealing a driveway?
The cost of sealing a driveway depends on its area, its condition, the sealer and local labor rates. A clean, crack-free driveway takes one quick pass; an old one needs washing, oil-spot priming, crack filling and patching first. Two coats cost more than one. Acrylic sealers cost more than coal tar or emulsion. Long, narrow or sloped driveways take longer to edge and spread, and big commercial lots cost less per square foot because setup is spread over more pavement.
How do you estimate sealcoating for your own driveway?
You estimate sealcoating by measuring the driveway in square feet, multiplying by the per-square-foot range, and adding crack filling by the foot. For new paving, the asphalt calculator works out tons of mix.
- Measure the driveway length × width, or outline it on a satellite map if it curves.
- Multiply the square feet by the per-square-foot range.
- Walk the cracks and add their length at the contractor’s price per foot.
- Add patching for potholes and a minimum charge on small drives.

Brookside Church’s east lot measures 6,200 sq ft. The example quote is $2,980.00, and the church has viewed it 3 times.
Paving contractors can see how lots are measured, sealed, crack-filled and quoted on the paving contractors page.
Measure the lot, quote the sealcoatOutline the pavement in AreaPal, draw the cracks as lines and send the quote from the same screen.Questions
How much is sealcoating a driveway?
Multiply the driveway's area by the price per square foot: $0.17 to $0.24 for professional sealcoating according to LawnStarter (2026), or $0.88 to $2.10 according to Fixr (2025). A 20x20 ft driveway is 400 sq ft. Small driveways often pay a minimum charge instead.
How much does it cost to seal a driveway yourself?
Doing it yourself saves the labor: you buy sealer by the pail, crack filler, a squeegee or brush and a cleaner. The pail label gives the coverage per coat, so measure the driveway first and buy for two coats if the surface is old.
How often should a driveway be sealed?
Most driveways are resealed every few years, and hot sun or heavy snow wears the coating faster. Sealing too often can make the coating peel, so reseal when the surface turns gray and starts to show fine cracks.
Is asphalt or concrete cheaper for a new driveway?
A new asphalt driveway costs $3.92 to $6.25 per sq ft installed (LawnStarter, 2026). A plain concrete slab costs $4.34 to $7.73 per sq ft installed (LawnStarter, 2026), and driveways are often poured thicker than that. Asphalt needs sealing every few years; concrete costs less to keep up.
How much does parking lot sealcoating cost?
Parking lots cost less per square foot than driveways because the crew's setup is spread over a larger area. AreaPal's example quote for Brookside Church's 6,200 sq ft east lot is $2,980.00; it is one contractor's example quote, not a market price.
Sources: Typical costs, what a contractor charges the customer (US): LawnStarter, asphalt driveway price (October 19, 2026) and concrete slab price (November 3, 2026); Fixr, Cost to Seal Asphalt Driveway (updated January 31, 2025). Read November 2026. The Brookside Church quote is AreaPal's example quote, not a market price.





Imagery USDA NAIP 2023