The short answer
- A paver patio costs $10 to $24 per sq ft installed (LawnStarter, 2026); This Old House gives $8 to $25 (2026).
- A retaining wall costs $15 to $45 per sq ft of face installed (Fixr, 2025), or $20 to $53 per sq ft (LawnStarter, 2026).
- Patio cost is area × price per sq ft: a 12 × 12 ft patio is 144 sq ft, a 20 × 20 ft patio 400 sq ft.
- Sealing pavers is priced per sq ft on its own line; we found no current source for a range.
How much does a paver patio cost per square foot?
A paver patio costs $10 to $24 per square foot installed, according to LawnStarter (2026), and This Old House gives $8 to $25 (2026). The two sources are close. Installed means the pavers, the gravel base, bedding sand, edging and labor.
| Job | Typical cost | Source |
|---|---|---|
| paver patio installedInstalled, labor and materials | $10–$24 per sq ft | LawnStarter, November 2026 |
| paver patio installedInstalled | $8–$25 per sq ft | This Old House, June 2026 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
Plain concrete pavers sit at the low end. Natural stone, clay brick, permeable pavers and patterns with many cuts, such as herringbone, push the price toward the top.
How much does a 10x10, 12x12 or 20x20 paver patio cost?
A paver patio costs its area in square feet times the installed price, $10 to $24 per square foot (LawnStarter, 2026). The areas and paver counts for common sizes, before waste:
| Patio size | Area | 4 × 8 in pavers, before waste |
|---|---|---|
| 10 × 10 ft | 100 sq ft (9.3 m²) | 450 |
| 12 × 12 ft | 144 sq ft (13.4 m²) | 648 |
| 12 × 16 ft | 192 sq ft (17.8 m²) | 864 |
| 16 × 20 ft | 320 sq ft (29.7 m²) | 1,440 |
| 20 × 20 ft | 400 sq ft (37.2 m²) | 1,800 |
Add extra pavers for cuts along edges and curves; a herringbone pattern takes more than a straight running bond. The paver calculator adds the waste for your pattern and gives the base gravel and sand too.
How much does it cost to seal driveway pavers?
Sealing driveway pavers costs the paved area in square feet times the contractor’s sealing rate. We could not check a current source for that rate, so this guide gives no figure; ask for sealing as its own line on the quote, priced per square foot.
What goes into the price:
- Cleaning. Pavers are washed and stains treated before any sealer goes on.
- Joint sand. Washed-out joints are refilled, often with polymeric sand, before sealing.
- Sealer type. Wet-look and matte sealers, water-based or solvent-based, cost differently.
- Area and access. A driveway is usually larger than a patio and has to stay closed until the sealer cures.
Because sealing is priced on the same area as the pavers, the driveway or patio only needs to be measured once for both jobs. Sealing wears and is redone every few years, so it is a maintenance line as well as part of a new install.
How much does a retaining wall cost?
A retaining wall costs $15 to $45 per square foot of face installed, according to Fixr (2025): $15 to $35 for segmental block and $30 to $50 for concrete block. LawnStarter gives $20 to $53 per square foot (2026). By the linear foot, a backyard wall runs $30 to $150 (Fixr, 2025) or $33 to $255 (LawnStarter, 2026).
| Job | Typical cost | Source |
|---|---|---|
| retaining wallAverage $33 per sq ft; interlocking block $15–$35, poured concrete $20–$40 | $20–$53 per sq ft | LawnStarter, October 2026 |
| retaining wall, backyardBackyard walls; slope ($40–$200) and shoreline ($108–$288 per linear ft) walls cost more | $33–$255 per linear foot | LawnStarter, October 2026 |
| retaining wall installedInstalled, materials and labor; segmental block $15–$35, concrete block $30–$50 per sq ft of face | $15–$45 per sq ft of face | Fixr, January 2025 |
| retaining wallBackyard $30–$150, slope $40–$200, shoreline $150–$600 per linear ft | $20–$600 per linear foot | Fixr, January 2025 |
What a contractor charges the customer. US, read November 2026. Not AreaPal's price.
The face area is the wall’s length times its exposed height: a wall 30 ft long and 3 ft tall has 90 sq ft (8.4 m²) of face. Taller walls often need an engineer’s design and drainage behind them, which is why the per-foot ranges are so wide.
What drives the cost of a paver patio?
The cost of a paver patio depends on its area, the paver, the pattern, the base work and the site. The main drivers:
- Area. More square feet means more pavers, base and labor.
- Paver material. Concrete pavers cost less than natural stone or clay brick.
- Pattern and shape. Herringbone, borders and curves take more cuts and more waste than a straight rectangle.
- Base and excavation. Digging out, hauling soil away and compacting gravel are a large part of the labor.
- Walls, steps and edges. Seat walls, steps and retaining walls are priced on their own lines.
- Removal and access. Breaking out an old patio, and a back yard that machines cannot reach, add cost.
How do you estimate your own paver patio?
You estimate a paver patio by measuring its area in square feet, multiplying by the installed range, then adding walls, steps and removal. Measure each rectangle of the patio and add them up.
- Measure the patio’s length and width, or trace an odd shape on a satellite map.
- Multiply the square feet by $10 and by $24 (LawnStarter, 2026).
- Add any retaining wall by its face area at $15 to $45 per sq ft (Fixr, 2025).
- Add removal of an old patio and sealing as separate lines.

A contractor can price the same patio in concrete pavers, tumbled pavers and natural stone and send them as options on one quote. The customer picks one, approves it and signs in the browser.
The paver calculator, retaining wall calculator and gravel calculator give the materials behind the price. Hardscape contractors can see how patios and walls are measured and priced on the hardscape contractors page.
Measure the patio, then quote the optionsDraw the patio on the map in AreaPal and send pavers, walls and sealing on one quote.Questions
Is a paver patio cheaper than concrete?
No. A plain concrete slab costs $4.34 to $7.73 per sq ft installed (LawnStarter, 2026), while a paver patio costs $10 to $24 (LawnStarter, 2026). Pavers cost more to lay, but single pavers can be lifted and replaced where concrete would be cut out.
How much does a 12x12 paver patio cost?
A 12 × 12 ft patio is 144 sq ft, so multiply 144 by LawnStarter's 2026 range of $10 to $24 per sq ft installed for the low and high price. Steps, walls and removal of an old patio are added on top.
Do pavers need to be sealed?
No, sealing is optional. A sealer can deepen the color, resist stains and help hold the joint sand, but it wears and has to be reapplied, so it is a maintenance cost as well as a one-time one.
Can you build a paver patio yourself?
Yes. You save the labor, but you still dig out the base, compact gravel in layers, screed the sand and cut the edge pavers. A plate compactor and a saw are usually rented for the job.
Sources: Typical installed costs, what a contractor charges the customer (US): LawnStarter, paver patio price (November 3, 2026), concrete slab price (November 3, 2026) and retaining wall price (October 5, 2026); This Old House, paver patio cost (updated June 10, 2026); Fixr, Retaining Wall Cost (updated January 31, 2025). Read November 2026. Pavers per sq ft: a 4 × 8 in paver is 32 sq in, 4.5 per sq ft. 1 sq ft = 0.0929 m²: NIST Handbook 44, Appendix C.





Imagery USDA NAIP 2023